|
|
Products' name£º |
Inverter DC Gas Metal Arc Welding Machine |
Products' catagory£º |
Products Display>>GMAW |
Products' model£º |
HC-350 |
Products' characteristic£º |
¡ñPerfect welding quality, nice welding line and perfect welding quality are achieved for improvement of electric arc by using special reactors.
¡ñHigh ratio of arc-igniting 100% ration of arc igniting is achieved by using special circuit of arc ignition is achieved by using special circuit of arc igniteion.
¡ñStable welding anti-interference and anti-undulation capacity is strong by using rapid reactive circuit and EMC treatment.
¡ñPredefining function£ºit is easy for beginner to handle with digital display of welding current and voltage and data predefining function.
¡ñSplash is deeply reduced by using dynamic welding characteristic control circuit.
¡ñArea influenced by heating is smaller, so welding distortion is much less too.
¡ñPower source is deeply saved with smaller dimension and lighter weight.
|
|
|
Products' name£º |
HCB series portable digital-control cutting machine |
Products' catagory£º |
Products Display>>Cutting & welding equipment |
Products' model£º |
HCB-1200¡Á2000 |
Products' characteristic£º |
¡ñCutting form: Any plane figure formed by beeline or arc can be fabricated under relevantly programming.
¡ñValid cutting width: 0¡ª1200mm
¡ñValid cutting length: 0¡ª2000mm
¡ñCutting thickness: 6¡ª150mm for flame cutting
¡ñCutting precision: To China standard JB/T10045.3-99
¡ñInstallation method: Knockdown design for easy installation and moving.
¡ñCutting torch: one set of flame torch
¡ñDigital-control system: START system
¡ñProgramming software: Inte GNPS (fully automatic graph program software on base of AutoCAD)
¡ñGas in use: Oxygen + acetylene or propane
¡ñSpeed range: 0¡ª1000mm/min. for flame cutting |
|
|
Products' name£º |
Inverter DC Manual Metal Arc Welding Machine |
Products' catagory£º |
Products Display>>SMAW |
Products' model£º |
HM500 |
Products' characteristic£º |
¡ñElecrtric arc is stable, splash is less, and the welding line is performed perfectly. It is suitable for welding in acidic rod, alkaline rod and cellulose rod downwards welding. It also can be used for carbon arc gouging (For HM500).
¡ñIts dynamic characteristic is perfect and response is rapid, so it can be used for welding from all position.
¡ñThe current for arc igniting can be freely adjusted. Arc can be ignited eadily with stable current even under little current.
¡ñPush current can be adjusted for perfect arc capability and avoiding conglutination.
¡ñCurrent and voltage are displayed in digital. Welding current can be set ahead.
¡ñIts compensation ability of power source voltage is perfect. Welding can be performed normally under the power voltage from 340V to 420V.
¡ñSafety and reliability can be insured with over-current and overheat protection and EMC and EMI.
|
|
|
Products' name£º |
Inverter DC Manual Metal Arc Welding Machine |
Products' catagory£º |
Products Display>>SMAW |
Products' model£º |
HM400 |
Products' characteristic£º |
¡ñElecrtric arc is stable, splash is less, and the welding line is performed perfectly. It is suitable for welding in acidic rod, alkaline rod and cellulose rod downwards welding. It also can be used for carbon arc gouging (For HM500).
¡ñIts dynamic characteristic is perfect and response is rapid, so it can be used for welding from all position.
¡ñThe current for arc igniting can be freely adjusted. Arc can be ignited eadily with stable current even under little current.
¡ñPush current can be adjusted for perfect arc capability and avoiding conglutination.
¡ñCurrent and voltage are displayed in digital. Welding current can be set ahead.
¡ñIts compensation ability of power source voltage is perfect. Welding can be performed normally under the power voltage from 340V to 420V.
¡ñSafety and reliability can be insured with over-current and overheat protection and EMC and EMI. |
|
|
Products' name£º |
Inverter DC Manual Metal Arc Welding Machine |
Products' catagory£º |
Products Display>>SMAW |
Products' model£º |
HM315 |
Products' characteristic£º |
¡ñElecrtric arc is stable, splash is less, and the welding line is performed perfectly. It is suitable for welding in acidic rod, alkaline rod and cellulose rod downwards welding. It also can be used for carbon arc gouging (For HM500).
¡ñIts dynamic characteristic is perfect and response is rapid, so it can be used for welding from all position.
¡ñThe current for arc igniting can be freely adjusted. Arc can be ignited eadily with stable current even under little current.
¡ñPush current can be adjusted for perfect arc capability and avoiding conglutination.
¡ñCurrent and voltage are displayed in digital. Welding current can be set ahead.
¡ñIts compensation ability of power source voltage is perfect. Welding can be performed normally under the power voltage from 340V to 420V.
¡ñSafety and reliability can be insured with over-current and overheat protection and EMC and EMI. |
|
|
Products' name£º |
SCR Controlled DC Submerged Arc Welding Machine |
Products' catagory£º |
Products Display>>SAW |
Products' model£º |
MZ-1000 |
Products' characteristic£º |
¡ñWith multifunction: submerged arc welding, carbon arc air gouging.
¡ñWith better capabilities by using technology of digital controlling and perfect protection functions.
¡ñSuitable for working on various spots with novel design and three protection treating method.
¡ñSuitable for welding from all position with agile automatic wire feeder.
|
|
|
Products' name£º |
Inverter DC Gas Metal Arc Welding Machine |
Products' catagory£º |
Products Display>>GMAW |
Products' model£º |
HC-500 |
Products' characteristic£º |
¡ñPerfect welding quality, nice welding line and perfect welding quality are achieved for improvement of electric arc by using special reactors.
¡ñHigh ratio of arc-igniting 100% ration of arc igniting is achieved by using special circuit of arc ignition is achieved by using special circuit of arc igniteion.
¡ñStable welding anti-interference and anti-undulation capacity is strong by using rapid reactive circuit and EMC treatment.
¡ñPredefining function£ºit is easy for beginner to handle with digital display of welding current and voltage and data predefining function.
¡ñSplash is deeply reduced by using dynamic welding characteristic control circuit.
¡ñArea influenced by heating is smaller, so welding distortion is much less too.
¡ñPower source is deeply saved with smaller dimension and lighter weight.
|
|
|
Products' name£º |
Inverter DC Manual Metal Arc Welding Machine |
Products' catagory£º |
Products Display>>GTAW |
Products' model£º |
HT400 |
Products' characteristic£º |
¡ñRich functions: DC TIG welding, pulsed TIG welding and DC MMA welding.
¡ñIt can be used for spot-welding, and spot-welding time can be adjusted continuously.
¡ñPulse frequency and pulse ration can be adjusted continuously and widely.
¡ñArc-starting current, arc-crater current, welding current and pulsed current can be adjusted separately
and independently.
¡ñIt is with current-presetting function and suitable for long-distance welding.
¡ñIt is with arc-force current adjustment function and suitable for basic or acidic welding rod.
¡ñAdopt PMW technology, and inverter frequency can reach to 20 KHZ.
¡ñWith protection against voltage wave, water lack, short circuit, overheat and overcurrent.
¡ñMoistureproof/dustproof/saltproof treatment, EMC and EMI.
¡ñSmall body and light weight, high efficiency and energy saving. Ignition by HF with high success. |
|
|
Products' name£º |
Transformer Model DC Gas Metal Arc Welding Machine |
Products' catagory£º |
Products Display>>GMAW |
Products' model£º |
NBC200 |
Products' characteristic£º |
¡ñElectrocircuit is laconic and suitable for maintenance.
¡ñIt is designed with the integrative structure and easy for using.
¡ñSelect the pivotal units from world famous manufactories to guarantee security and dependability.
¡ñWith excellent welding capability, it can be used from all positions for welding. |
|
|
Products' name£º |
Inverter DC Manual Metal Arc Welding Machine |
Products' catagory£º |
Products Display>>GTAW |
Products' model£º |
HT500 |
Products' characteristic£º |
¡ñRich functions: DC TIG welding, pulsed TIG welding and DC MMA welding.
¡ñIt can be used for spot-welding, and spot-welding time can be adjusted continuously.
¡ñPulse frequency and pulse ration can be adjusted continuously and widely.
¡ñArc-starting current, arc-crater current, welding current and pulsed current can be adjusted separately
and independently.
¡ñIt is with current-presetting function and suitable for long-distance welding.
¡ñIt is with arc-force current adjustment function and suitable for basic or acidic welding rod.
¡ñAdopt PMW technology, and inverter frequency can reach to 20 KHZ.
¡ñWith protection against voltage wave, water lack, short circuit, overheat and overcurrent.
¡ñMoistureproof/dustproof/saltproof treatment, EMC and EMI.
¡ñSmall body and light weight, high efficiency and energy saving. Ignition by HF with high success. |
